STEEL SLATE FIRE / NON FIRE RATED SINGLE SKIN ROLLING SHUTTER
|
SPECIFICATION
TYPE-I
1.Curtain: - Constructed from 75 mm or 100 mm curved section galvanized steel laths 1.0 mm to 2.0 mm thick with pre-formed self groove end locks to alternate laths to prevent lateral movement.
2.Bottom Rail: - Formed from 40mm x 40mm x 6 mm thick Mild Steel Angles inverted “T?section.
3.Guides:- The side guides are formed from 90x25x2.8 mm thick galvanized steel angles, prepared
For fixing to the opening structure by means on M.S. fixing angles 75mm x 75mm x 6mm.
4.Endplates: - Fabricated from mild steel of adequate thickness relative to door size and supplied with angles for fixing to the structure.
5.Roller: - The roller is manufactured from mild steel tube of sufficient diameter and wall thickness to resist deflection and is mounted in bearings or cups on end plate.
6.Finish: - Powder coated to RAL standard color.
7.Operation: - Electrical operated, single phase Motor.
8.Controls: - The standard controls are by means of open/close and stop push buttons fitted adjacent to the shutter.
Available Make ?UK, Australia, Malaysia, and UAE.
|
|
|
|
|
|
|